AutoCAD drawing tools: Polyline

Polyline is a type of drawing commands to create lines, but the resulting object is a polyline single-entity line.

Differences polyline commend with Line command
Polyline:
1. If it is used for a segment that is segmented, the result of the line is a whole.
2. Can be made in combination with curved lines.
Line:
1. If it is used for a segment that is segmented, the resulting line is not a single unit.
2. Cannot be made in combination with curved lines.

How to activate the polyline command in AutoCAD:
1. Command method
Command: pline
Command method
2. Toolbar method
Toolbar method

The polyline commands application method:
a) Activate the Polyline command
b) Click the starting point for making a line (point 1)
c) Type @ 5.0 (5 for x, 0 for y), then press enter
d) Type @ 8 <30, then press enter
e) Type A (arch = curved), then press enter
f) Click point 3 (specify curvature)
g) Type L (line), then press enter
h) Click point 4 (last point), then press enter
The polyline commands application method

If you are interested in this information, you can join this website for FREE!

Comments

Popular posts from this blog

Pengalaman Service Iphone di iBox Dago Rp. 0,- Diganti Unit Baru!

Rumus Menghitung Kebisingan (noise calculation formula)

Cara Menghitung Kecepatan Angin Berdasarkan Ketinggian yang Berbeda